S. Parveen – Nanotechnology and Chemistry – Women Researcher Award

Posted on by usudeeparya

S. Parveen – Nanotechnology and Chemistry – Women Researcher Award

Dr. parveen distinguished academic and researcher in the field Nanotechnology and chemistry.

🌐 Professional Profile

Educations📚📚📚

She holds a Bachelor’s degree in Physical, Inorganic, and Organic Chemistry from Bharathiar University, Coimbatore, completed in 2005 with an impressive 91.5% marks. She pursued her postgraduate studies in the same field at Bharathiar University, graduating in 2007 with 80% marks. Additionally, she earned an M.Phil. in Inorganic Chemistry from Bharathiar University in 2008. Her academic journey culminated in a Ph.D. in Inorganic Chemistry from Bharathiar University, Coimbatore, which she completed between 2012 and 2018. Her Ph.D. thesis was titled “Structural diversity and biological evaluation of metal complexes of Schiff bases generated from hydrazine derivatives and α-ketoacids.”

Awards and other Honours

She has received numerous distinctions, prizes, medals, awards, and other honors throughout her academic and professional career. She qualified for the GATE examination in February 2007 with an impressive 85%, securing an All India Rank of 727. She was awarded the Bharathiar University First Rank holder award in M.Sc. Chemistry by the Governor. In July 2023, she inaugurated the “BioInspired Material Research Laboratory” for conducting a DST project at her host institute. She acted as the Chief Guest for the research workshop “Art of Proposal Writing for Research Grants” held on August 12, 2023, at Dr. N.G.P. Institute of Technology, Coimbatore, India. Additionally, she served as a resource person in a “Knowledge Sharing Session” conducted by Dr. Mahalingam College of Engineering and Technology, Pollachi. Recently, her manuscript was selected for the cover page of the New Journal of Chemistry.

Membership

She has been actively involved in various national and international academies and professional societies. In April-May 2006, she completed the STIC’06 summer research fellowship in the field of Infrared and Mass Spectroscopy at IGCAR, Kalpakkam. From May 2014 to April 2017, she successfully completed a DST-WOS(A) project worth Rs. 18,18,517. In October 2019, she was recognized as a Research Supervisor under the Faculty of Science and Humanities (Ref. No. 3470036) by Anna University, Chennai.

Research Experience

As of February 15, 2024, she has extensive research experience, having held various positions in chronological order. She is currently a Women Scientist under the DST-WOS(A) program since April 20, 2023, serving as the Principal Investigator. Prior to this, she held the same position from May 8, 2014, to May 7, 2017, and successfully completed her responsibilities as the Principal Investigator. From September 1, 2007, to September 30, 2008, she worked as a Research Scholar at Bharathiar University, focusing on project work.

She has also been involved in significant research projects, including “Metal Hydrazones as precursors for the synthesis of nanocrystalline metal and mixed metal (spinel) oxides,” funded by DST-WOS(A) with an amount of Rs. 18,18,500 in 2014. Another ongoing project, “Nanostructured bi-functional metal Schiff base complexes and its spinel oxides for biological and energy storage applications,” is also funded by DST-WOS(A) with an amount of Rs. 33,02,620.

In terms of research supervision, she has guided several students. She supervised Mr. M. Arun, who completed his M.E. in Civil Engineering from Anna University in 2021. Currently, she is supervising two B.E. Civil Engineering students, Ms. S. Sangamithra and Ms. R. Jeetha, both of whom are expected to complete their degrees from Anna University in 2024.

📝🔬Publications📝🔬

Nidhi Chauhan – Biosensor – Outstanding Scientist Award

Posted on by usudeeparya

Nidhi Chauhan – Biosensor – Outstanding Scientist Award

Prof Dr. Nidhi Chauhan  distinguished academic and researcher in the field Biosensor. she worked as a Research Associate at the Indian Council of Medical Research (ICMR) in New Delhi. Additionally, she was a Senior Research Fellow at ICMR from April to November 2012. Earlier in her career, she was a Biochemistry Lecturer at Teerthanker Mahaveer Dental College and Research Centre in Moradabad, Uttar Pradesh, India, from 2007 to 2009.

 

🌐 Professional Profile

Educations📚📚📚

She earned her PhD in Biochemistry from the Department of Biochemistry at Maharshi Dayanand University, Rohtak, under the supervision of Prof. C.S. Pundir, from 2009 to 2012, achieving the Gold Medal and the Best PhD Thesis Award. Prior to that, she completed her M.Phil. in Biochemistry at Vinayaka Mission University, India, in 2007-2008. She obtained her M.Sc. in Biochemistry from Sardar Bhagwan Singh University, Dehradun, Uttarakhand, India, during 2004-2006, and her B.Sc. in Biochemistry from M.J.P. Rohilkhand University, Moradabad, Uttar Pradesh, India, between 2002 and 2004.

POSITIONS  

She is currently a Senior Associate Professor at the School of Health Sciences & Technology (SoHST) at the University of Petroleum and Energy Studies (UPES) in Bidholi, Dehradun, India, a position she has held since 2022. Previously, she was an Associate Professor at the Amity Institute of Nanotechnology, Amity University Uttar Pradesh (AUUP) in Noida, India, from 2021 to 2022, and an Assistant Professor at the same institute from 2013 to 2021. In May-July 2013, she served as a Senior Research Associate at AUUP, and from May to December 2012,                                                                                                                                        

Awards

he has received numerous awards, accomplishments, and honors throughout her career. In 2022, she was ranked No. 1 as the Best Scientist in Nanoscience and Nanotechnology and 6th in the whole Science and Technology domain at Amity University by AD Scientific Index. She was also awarded the prestigious SERB International Research Experience (SIRE) Fellowship to work at Malmö University in Sweden and received the Best Presentation Award at an international conference on “Recent Advances in Nano Medical Sciences (RANMS2022)” at the University of Delhi. In 2021, she was ranked and selected in the top 2% of World Scientists by Stanford University and recognized as one of the “Top Youngest Authors” affiliated with Amity University in Scopus, having completed over 100 research papers in high-impact journals. She also received the “Outstanding Plus” Researcher and Faculty award in 2021 and 2020 during the annual research and academic performance grading at Amity University, and she was ranked in the top 2% of Scientists of India by Stanford University in 2020. Additionally, she was awarded the title of “Trigger Rider” for achievements in scientific research and innovation for Amity University.

In 2019, she received an international travel grant award from DBT, India, for being a keynote speaker in Paris, France. Her research paper was published as the first author with Nobel Laureate Prof. Barry J. Marshall in 2018, and her research work was highlighted in the online news “Managing diabetes with 3D nanostructured” on Atlas of Science. In 2017, she was awarded the DBT-Indo-Australian Career Boosting Gold (IACBGF) Fellowship to work with Nobel Laureate Prof. Barry J. Marshall at the University of Western Australia for four months and received a Golden Letter of Appreciation from him. She also received the Best Scientist Medal from the International Association of Advanced Materials (IAAM) in 2017.

Her other accolades include the Best Presentation Award at the International Conference on Materials Science & Technology (ICMTech-2016) at the University of Delhi, India, and the Best Poster Presentation Award at “ICRTMD2015” at Amity University Uttar Pradesh (AUUP). In 2015, she received the DBT and ICMR International Travel Grant to attend the Advanced Materials World Congress in Sweden. She was awarded the Most Prestigious Shakuntala Amir Chand Award by the Indian Council of Medical Research, Government of India, in 2014, along with a Visiting Research Fellowship by JNCASR-Bangalore, India. She also received a travel grant from TWAS for a poster presentation at NIMHANS-Bangalore in 2014.

Her other notable achievements include the Second Best Poster Award at the international conference on Health, Environment & Industrial Biotechnology at Motilal Nehru National Institute of Technology, Allahabad, in 2013, the Gold Medal Award for Best PhD Thesis in 2012, and the Best Poster Presentation Award at the National Conference on Carbon Materials 2012 (CCM12) at Bhabha Atomic Research Centre, Mumbai. In 2011, she was granted a prestigious US patent (PCT Application Number PCT/IN2011/000833), and her research was highlighted in Nature India for “Brain Protein as pesticide sniffer.” In 2010, she was awarded a foreign travel grant by CSIR, New Delhi, to present a paper at the Biosensors 2010, the 20th Anniversary World Congress on Biosensors, in Glasgow, UK.

EDITORIALANDCONFERENCEORGANIZINGRESPONSIBILITIES

Book Chapters:

  1. Nidhi Chauhan, Kirti Saxena., 2021 Nanoscale interface techniques for standardized integration ofnanosensorsincurrent devices, NanosensorsforSmartManufacturing,pp91-114
  2. Chauhan, N., Pudake, R.N., Jain, U. and Balayan, S., 2021. Recent Advances in Biosensor DevelopmentforPoultryIndustry.BiosensorsinAgriculture:Recent TrendsandFuturePerspectives,pp.435-453.
  3. Jain, U., Pudake, R.N., Chauhan, N. and Pareek, S., 2021. Advancements in Biosensors for FungalPathogenDetectioninPlants.BiosensorsinAgriculture:RecentTrendsandFuturePerspectives,pp.205-216.
📝🔬Publications📝🔬

Arnab Das -Manufacturing Technology – Best Researcher Award

Posted on by usudeeparya

Arnab Das –  Manufacturing Technology – Best Researcher Award

Dr. Arnab Das distinguished academic and researcher in the field Manufacturing Technology. He is currently an Assistant Professor at Swami Vivekananda University in Barrackpore, Kolkata, having joined the institution on March 1, 2024. He completed his Ph.D. in Mechanical Engineering at the Indian Institute of Technology (ISM) Dhanbad, where he conducted his research under the guidance of Prof. Vivek Bajpai.

🌐 Professional Profile

Educations📚📚📚

He completed his Ph.D. in Mechanical Engineering at the Indian Institute of Technology (ISM) Dhanbad in 2023, under the supervision of Prof. Vivek Bajpai, with a thesis titled “Development of high-speed micromachining center and its performance evaluation in micro and diamond turning.” He also holds an M.Tech in Mechanical Engineering with a specialization in Manufacturing Engineering from the same institution, completed in June 2018 under the guidance of Prof. Vivek Bajpai. His M.Tech thesis focused on the “Development of vibration-free machine structure for high-speed micro milling center,” and he graduated with first-class distinction, achieving a CGPA of 9.13. Prior to this, he earned a B.Tech in Mechanical Engineering from the Govt. College of Engineering & Textile Technology, Berhampore, West Bengal, in July 2016, where his project was titled “Refrigeration with the help of Peltier effect” and he graduated with a first-class CGPA of 8.95. He completed his 12th grade at Sree Ramkrishna Sikshalaya in Howrah, West Bengal, in June 2012 with a first division and a percentage of 87.2%, and his 10th grade at the same school in May 2010, also with a first division and a percentage of 84.75%.

Experience

He has extensive research experience in various aspects of mechanical engineering. His research endeavors include the development of dynamically stable high-speed micromachining centers capable of machining complex micro components from difficult-to-machine materials. Additionally, he has worked on introducing high-speed micro turning techniques to enhance the productivity of cylindrical micro components. Furthermore, his research focuses on reducing cutting forces in turning operations through the utilization of micro-structured cutting tools and Minimum Quantity Lubrication (MQL). Moreover, he has contributed to the advancement of diamond turning technology by developing cost-effective methodologies employing ceramic bearing spindles to achieve nano-finished surfaces. In terms of teaching, he has served as an Assistant Professor at Swami Vivekananda University in Barrackpore, Kolkata, since March 2024, and previously held the same position at Camellia Institute of Technology in Madhyamgram from July 2023 to February 2024. He also gained teaching experience as a Teaching Assistant during his M.Tech. and Ph.D. at the Indian Institute of Technology (ISM) Dhanbad, where he assisted in various subjects such as Manufacturing Process Lab, Theory of Metal Forming, Micromanufacturing, Advances in Machining, CNC Programming Lab, and Production Technology Lab.

Research Interests:

He is currently engaged in research spanning various areas of precision engineering and machining. His primary interests lie in micro turning, ultraprecision diamond turning, and high-speed micromachining, where he delves deep into the intricacies of metal cutting processes. Additionally, he focuses on understanding machine tool dynamics to optimize performance. Utilizing finite element modeling (FEM), he investigates the complex interactions within machining systems, aiming to enhance accuracy and efficiency. Beyond conventional methods, he explores unconventional machining techniques and embraces additive manufacturing, continually expanding his expertise and contributing to advancements in manufacturing technology.

📝🔬Publications📝🔬
  • . Arnab Das, Vivek Bajpai, “Turning insert with lubricating passage along the normal plane for
    minimization of friction, cutting force and tool wear”, Journal of Manufacturing Processes
    (2023) vol 101, pp 141-155, 2023. https://doi.org/10.1016/j.jmapro.2023.05.066 (Impact factor:
    5.684, SCI Indexed)
  • Arnab Das, Vivek Bajpai, “Machinability analysis of lead free brass in high speed micro turning
    using minimum quantity lubrication”, CIRP Journal of Manufacturing Science and Technology
    (2023) vol 41, pp 180-195, 2023. https://doi.org/10.1016/j.cirpj.2022.11.023 (Impact factor: 3.56,
    SCI Indexed)
  • Arnab Das, Abisoor Rishi Sharan Mundu, Vivek Bajpai, “Enhancing tribological performance of
    lead free brass in high speed micro turning via hybrid cryogenic cooling technique”, Tribology
    International (2022) vol 179, 108090, 2022. https://doi.org/10.1016/j.triboint.2022.108090
    (Impact factor: 5.62, SCI Indexed)
  • Arnab Das, Shashank Shukla, Mohan Kumar, Chitransh Singh, Madan Lal Chandravanshi, Vivek
    Bajpai, “Development of a vibration free machine structure for high-speed micro-milling center”,
    The International Journal of Advanced Manufacturing Technology, vol 116, 2021, pp 3489-
    3506. https://doi.org/10.1007/s00170-021-07533-1 (Impact factor: 3.563, SCI Indexed)
  • Chitransh Singh, Arnab Das, Vivek Bajpai, and Madan Lal Chandravanshi, “Effects of process
    parameters on tool vibration and force transmissibility in high-speed micro-milling machine”,
    Journal of the Brazilian Society of Mechanical Sciences and Engineering (2023) vol 45: 343,
    pp 1-14, 2023. https://doi.org/10.1007/s40430-023-04266-y (Impact factor: 2.361, SCI Indexed)
  • Arnab Das, Shri Narayan Agnihotri, Vivek Bajpai, “Compensation for Merchant’s Circle Diagram
    to predict cutting force in orthogonal micro turning”, Journal of Micromanufacturing, (Special
    issue on WCMNM 2021) vol 6(2), pp 101-111, 2023. https://doi.org/10.1177/25165984231171896
    (SCOPUS Indexed)
  • Arnab Das, Abisoor Rishi Sharan Mundu, and Vivek Bajpai, “Prediction of friction angle and
    cutting force considering sticking friction in machining process”, Sadhana, vol 48, 261, 2023.
    https://doi.org/10.1007/s12046-023-02312-y (Impact factor: 1.6, SCI Indexed)
  • Arnab Das, Vivek Bajpai, “A laser welding set up with dual focal lens for laser welding of
    dissimilar materials”, Indian Patent, Application no 202331006063 A, The Patent Office Journal
    No. 06/2023 Dated 10/02/2023, pp 9969. (Published)

Erdiwansyah – Science and Technology – Best Researcher Award

Posted on by usudeeparya

Erdiwansyah – Science and Technology – Best Researcher Award

Dr. Erdiwansyah  distinguished academic and researcher in the field Science and Technology. He has been involved in significant research projects, including the production of bio-coke from palm oil solid waste as a high-calorie and environmentally friendly fuel, a project spanning from 2022 to 2024. Additionally, he worked on developing biomass stove innovations using agricultural waste to fry chips in the Saree community of Aceh Besar.

 

🌐 Professional Profile

Educations📚📚📚

He holds a PhD in Renewable Energy and Technology from Universitas Syiah Kuala in Banda Aceh, Indonesia. He also earned a Master’s degree in Mechanical Engineering from the same institution. His academic journey began with a Bachelor’s degree from the Faculty of Engineering at Universitas Serambi Mekkah, also located in Banda Aceh, Indonesia.

Research Area

Renewable Energy, Biomass, Energy Conversions, Combustion, Biodiesel, Technology Renewable Energy.

📝🔬Publications📝🔬

Neha Agarwal – Additive Manufacturing and Material Science – Best Researcher Award

Posted on by usudeeparya

Neha Agarwal – Additive Manufacturing and Material Science – Best Researcher Award

Ms. Neha Agarwal distinguished academic and researcher in the field Additive Manufacturing and Material Science. Proven experience in bridging the gap between Biotechnology and Material Sciences with surface techniques
and characterization. Have successfully published scientific papers in high-impact journals.

🌐 Professional Profile

Educations📚📚📚

She is currently pursuing a PhD in Material Science at Dublin City University in Ireland, focusing on additive manufacturing of Ni-rich nitinol for superelastic properties for stent applications. Prior to that, she obtained a Master of Science in Micro and Nano Systems from Chemnitz University of Technology in Germany, with a grade of 2.1. She completed her Bachelor of Electronics and Communications Engineering with First Class with Distinction at Visveswariah Technological University in India.

Research experience

She has a diverse range of work experiences spanning various fields and countries. From May 2020 to August 2020, she engaged in upskilling herself with courses on Digital Marketing and Project Management through SkillnetIreland. In November 2019, she worked as a Researcher at Saarland University in Saabruecken, Germany, focusing on nanotechnological development for microfluidics.

From November 2018 to February 2019, she served as a Consultant at Altran S.A.S Deutschland – Carl Zeiss SMT in Oberkochen, Germany. Her responsibilities included the calculation of pressure drop in piping systems, development of a modular tool in Excel and MATLAB, and verification of the tool through Computational Fluid Dynamics (CFD).

She also engaged in upskilling on the German language for B2 certification at VHS in Saarbrücken, Germany, from January 2018 to October 2018.

Her work as an Optical Engineer at Sectago GmbH in Saarbrücken, Germany, from October 2016 to December 2017, involved the development of security features for banknotes and documents, including diffraction gratings, wafer preparation, material testing, and nanoimprinting.

Prior to that, from October 2014 to September 2016, she worked on electrode immobilization strategies for the construction of P450 biosensors.

Academic experience

She has extensive experience as a research assistant in various institutions and projects. At the Korea Institute of Science and Technology (KIST) Europe in Saarbrücken, Germany, she worked on sample preparation with aqueous solutions of pyrrole, polymerization using femtosecond Ultraviolet Laser on a microchip, synthesis of gold nanoparticles, and surface characterization using techniques like SEM, AFM, and conductivity measurements for antibody testing. She also contributed to the development of sensors in microfluidic chips through polymerization of conductive polymers using laser direct writing and surface modification techniques.

Previously, she was a research assistant at the Leibniz – Institute for New Materials (INM) in Saarbrücken, Germany. There, she worked on producing colorful coatings for various applications using Physical Vapor Deposition techniques, optimizing processes, investigating material properties, and employing different color measuring techniques.

Her master’s thesis at INM focused on micro-nano structuring and nitriding of Titanium alloy using fiber lasers for dental implants. This involved laser structuring, material characterization using various techniques, and structural analysis.

At Chemnitz University of Technology in Chemnitz, Germany, she worked on a research project involving capacitance-voltage characteristics of bi-layered MOSFETs, conducting measurements and analysis of dependency on frequency variations.

Her experiences demonstrate a strong background in research and hands-on work in materials science, nanotechnology, laser technology, and microfluidics.

📝🔬Publications📝

1. Effect of Heat Treatment Time and Temperature on the Microstructure and Shape Memory
Properties of Nitinol Wires, N Agarwal, J Ryan Murphy, TS Hashemi, T Mossop, D O’Neill, J
Power, A Shayegh, D Brabazon, Materials 16 (19), 6480

2. Influence of processing parameters on the corrosion resistance of additively manufactured
nitinol parts for biomedical applications, N Agarwal, KA Gallagher, S Keaveny, JG Carton, D
Brabazon, MA Obeidi, Results in Materials 21, 100536

3. Study of the effects of laser power and scanning speed on the microstructural morphologies and
physical properties of L-PBF produced Ni52. 39Ti47. 61, N Agarwal, MCC Monu, KT Selvam, MA
Obeidi, D Brabazon, Journal of Materials Research and Technology 27, 8334-8343

4. Influence of laser powder bed fusion and ageing heat treatment parameters on the phase
structure and physical behaviour of Ni-rich nitinol parts, N Agarwal, D Bourke, MA Obeidi, D
Brabazon, Journal of Materials Research and Technology, 2024

5. Laser induced anisotropic wetting on Ti–6Al–4V surfaces; Neha Agarwal, Alexander May, Juseok
Lee, Marcel Lambert, Cagri Kaan Akkan, F.P. Nothdurft, O.C. Aktas, Material Letters Journal

6. Ag–Al2O3 optical nanocomposites with narrow particle size distribution prepared by pulsed laser
deposition; Marcel Lambert, Alexander May, Cagri Kaan Akkan, Neha Agarwal, O.C. Aktas,
Material Letters Journal

7. A Cytochrome P450 3A4 Biosensor Based on Generation 4.0 PAMAM Dendrimers for the Detection
of Caffeine; Michael Müller, Neha Agarwal, Jungtae Kim, Biosensors

8. Direct writing of a conducting polymer pattern in aqueous solution by using an ultrashort laser
pulse; Neha Agarwal, Hyobong Ryu, Melanie Mangang, Wilhelm Pfleging, Jungtae Kim, Royal
Society of Chemistry Advances

Reem mohammed – Material science- Best Researcher Award

Posted on by usudeeparya

Reem mohammed – Material science- Best Researcher Award

Mrs. Reem Mohammed  distinguished academic and researcher in the field Material science.  She has been employed as a Lecturer in the Physics Department at the Faculty of Science, Ain Shams University, Cairo, Egypt, since October 2021. In this role, she has supervised the research activities of three MSc students and one PhD student while also fulfilling teaching responsibilities, as detailed in Appendix 1.

Since 2023, she has served as the Physics and Chemistry Program Coordinator, demonstrating her administrative skills and commitment to academic leadership. Additionally, she underwent training at the 9th JINR Summer Schools in Dubna, Russia, in 2017, enhancing her expertise in the field.

Prior to her current positions, she served as an Assistant Lecturer for undergraduate physics labs and courses at Ain Shams University from March 2016 to May 2021. Before that, she held the position of Academic Assistant, where she contributed to undergraduate physics and nuclear labs and courses from March 2012 to September 2016. Throughout her employment history, she has demonstrated dedication to both teaching and research, fostering the academic development of students while actively contributing to her field’s advancement.

🌐 Professional Profiles

Educations📚📚📚

She holds a Ph.D. in Physics from Ain Shams University, Egypt, earned between 2017 and 2021. Her doctoral thesis, titled “Synthesis and Characterization of Hybrid Nanocomposites as Photocatalyst for Wastewater Decontamination,” was the culmination of a joint research project involving the Physics Department at Ain Shams University, STDF, and the National Research Center. During her Ph.D. studies, she undertook specialized courses including Reactor, Computational Electromagnetics, and Radiation Protection.

Prior to her Ph.D., she completed her M.Sc. in Physics at Ain Shams University from 2012 to 2016. Her master’s thesis, “Radiation Copolymerization of micro and nano size Polymers and their Applications in Waste Water Decontamination,” showcased her expertise in the field. During her master’s studies, she delved into advanced topics such as Quantum Mechanics, Electrodynamics, Statistical Physics, and Computational Physics.

Her academic journey began with a Bachelor’s degree in Physics, where she excelled and ranked 1st among students in the Physics Department at Ain Shams University, Cairo, Egypt, from 2007 to 2011. Her outstanding performance led to her appointment as an academic assistant at the university. Throughout her educational and research endeavors, she has demonstrated a strong commitment to advancing knowledge in the field of Physics, particularly in areas related to radiation and wastewater decontamination.

Research Interests

Her research interests encompass a diverse range of topics within the realm of nanotechnology, environmental science, and materials physics. She specializes in the synthesis and characterization of various nanomaterials, exploring their potential applications in water treatment, purification, environmental remediation, and energy production. Specifically, her focus lies in synthesizing and characterizing nanocomposites as photocatalysts for wastewater decontamination, as well as preparing and characterizing different types of polymers for water purification purposes. Additionally, she is involved in the measurement and analysis of low-level natural radioactivity in building materials, evaluating its environmental impact. Furthermore, she conducts studies on the defect structure of different materials using positron annihilation techniques. Through her multifaceted research endeavors, she aims to contribute to the development of sustainable solutions for pressing environmental and energy challenges while advancing our understanding of material properties and their applications.

Honors and Distinctions

She has garnered numerous honors and distinctions throughout her academic and professional journey. In 2017, she received a traveling and participation grant from the Joint Institute for Nuclear Research in Dubna, Russia, enabling her to participate in the “Grid Technologies” summer school. Her commitment to academic skills and research management was recognized through her participation in modules such as “Scientific Thinking and Argumentation Skills for Problem Solving” and “Research Management” within the DAAD KairoAkademie in 2015. Additionally, she received a certificate from the Egyptian Society of Crystallography and Its Applications for attending the 11th International School and Workshop of Crystallography in 2012. She further enhanced her skills with a course in communication skills offered by the Faculty and Leadership Development Center in 2012.

Her academic excellence was evident through her award of first-class honors graduate status, where she ranked 1st among physics students in the Physics Department at Ain Shams University, Cairo, Egypt, in 2011. This achievement was accompanied by a Medal of Honor from the Egyptian Syndicate of Scientific Professions the same year. Her outstanding performance also earned her a place on the Dean’s Honor List and Monetary Awards from the Faculty of Science at Ain Shams University in 2011. Through her dedication and accomplishments, she has demonstrated a strong commitment to excellence in both her academic and professional endeavors.

📝🔬Publications📝🔬

  1. Mohammed, R., Ali, M. E. M(2023). Decorated ZnO nanorods with Bi2S3 nanosheets for enhanced photocatalytic removal of antibiotics and analgesics: Degradation mechanism and pathway” in the journal 
  2. Mohammed, R., Ali, M. E. M., Gomaa, E., & Mohsen, M. (2023). Promising MoS2–ZnO hybrid nanocomposite photocatalyst for antibiotics, and dyes remediation in wastewater applications. Environmental Nanotechnology, Monitoring & Management, 19, 100772.
  3. Mohammed, R., Ali, M. E. M., Gomaa, E., & Mohsen, M. (2022). Copper sulfide and zinc oxide hybrid nanocomposite for wastewater decontamination of pharmaceuticals and pesticides. Scientific Reports, 12(1), 18153.
  1. Mohammed, R., Ali, M. E. M., Abdel-Moniem, S. M., & Ibrahim, H. S. (2022). Reusable and highly stable MoS2 nanosheets for photocatalytic, sonocatalytic and thermocatalytic degradation of organic dyes: Comparative study. Nano-Structures & Nano-Objects, 31, 100900.‏
  2. Mohammed, R., Ali, M. E. M., Abdel-Moniem, S. M., & Ibrahim, H. S. (2022). Reusable and highly stable MoS2 nanosheets for photocatalytic, sonocatalytic and thermocatalytic degradation of organic dyes: Comparative study. Nano-Structures & Nano-Objects, 31, 100900.
  1. Mohammed, R., Ali, M. E. M., Gomaa, E., & Mohsen, M. (2021). Highly stable, reusable, and MW-assisted prepared ZnO nanorods for wastewater decontamination: Precursors ratios effect and insights on matrix and pollutants mineralization. Journal of Environmental Chemical Engineering, 9(1), 104630.‏
  2. Mohammed, R., Ali, M. E. M., Gomaa, E., & Mohsen, M. (2020). Green ZnO nanorod material for dye degradation and detoxification of pharmaceutical wastes in water. Journal of Environmental Chemical Engineering, 8(5), 104295.‏
  3. Mohsen, M., Kahil, H., Mohammed, R., &Helmy, S. (2019, June). The status of Egyptian women physicists. In AIP Conference Proceedings(Vol. 2109, No. 1, p. 050014). AIP Publishing LLC.‏
  4. Mohsen, M., Gomaa, E., Mazaid, N. A., &Mohammed, R. (2017). Synthesis and characterization of organic montmorillonite-polyvinyl alcohol-co-polyacrylic nanocomposite hydrogel for heavy metal uptake in water. AIMS Materials Science, 4(5), 1122-1139.
  5. Mohsen, M., Gomaa, E., Mazaid, N. A., & Mohammed, R. (2017)”Gamma-Radiation Induced Copolymerization of Sodium Alginate/Acrylamide for Application in Water Decontamination of Some Heavy Metals.” SF J Polymer
  6. Mohsen, M., Maziad, N. A., Gomaa, E., Aly, E. H., &Mohammed, R. (2015). Characterization of some hydrogels used in water purification: correlation of swelling and free-volume properties. Open Journal of Organic Polymer Materials, 5(03), 79

Anbumani – Biological properties of thinfilms Award – Graph Analytics Achievement Award

Posted on by usudeeparya

Anbumani – Biological properties of thinfilms Award – Graph Analytics Achievement Award

Mrs. Anbumani  distinguished academic and researcher in the field Analysis of Physical and biological properties of thinfilms. She served as a research scholar at the Department of Physics in Women’s Christian College, affiliated with Manonmanium Sundaranar University in Tirunelveli, Tamil Nadu, India. During her tenure, she dedicated her efforts to conducting a multifunctional analysis of polyvinyl alcohol film. This research involved investigating various properties and potential applications of PVA film, including mechanical strength, optical characteristics, and chemical stability. Her work held promise for diverse fields such as packaging, biomedicine, and electronics. Through her research, she contributed to advancing knowledge in the utilization of PVA film, potentially leading to environmentally friendly solutions and innovative technologies.

🌐 Professional Profiles

 

Educations📚📚📚

She holds a Doctor of Philosophy (Ph.D.) in Physics from Manonmanium Sundaranar University in Tirunelveli, Tamil Nadu, India. Currently, she is pursuing a Master of Philosophy (M.Phil.) in Physics at the same institution. Prior to her doctoral studies, she completed a Master of Science (M.Sc.) in Physics from Manonmanium Sundaranar University in 2014. Her academic journey began with a Bachelor of Science (B.Sc.) in Physics, also attained from Manonmanium Sundaranar University, in 2006. With a strong foundation in physics spanning from her undergraduate to her doctoral studies, she continues to expand her expertise and research pursuits at the intersection of physics and interdisciplinary fields.

Awards

She excelled in her academic pursuits, earning the fourth rank in the Master of Science (M.Sc.) program in Physics at Manonmanium Sundaranar University in Tirunelveli, Tamil Nadu, India, in 2014. This achievement reflects her exceptional dedication to her studies and her deep understanding of physics concepts.

Furthermore, she demonstrated her academic proficiency by qualifying in the National Eligibility Test for lectureship conducted by CSIR, India, in 2016. This accomplishment highlights her readiness and capability to pursue a career in academia, showcasing her expertise in physics and her potential as a future educator and researcher.

 

📝🔬Publications📝🔬

Serena Doria – Technological Networks – Women Researcher Award

Posted on by usudeeparya

Serena Doria – Technological Networks – Women Researcher Award

Assoc Prof Dr. Serena Doria distinguished academic and researcher in the field Technological Networks. She was responsible for the Ud’A Scienza Project financed under the Call for Scientific Dissemination PANN2020 – Annual Contributions Law 113/91 D.D. 1524 of 21/01/2019, promoted by the MUR. The Ud’A Scienza Project was funded for a total of €72,176, ranking ninth with a score of 55/60 out of 71 admitted projects, and it has a duration of 12 months (from 15.12.2021 to 15.12.2022).

🌐 Professional Profiles

Educations📚📚📚

she graduated in Mathematics, with a focus on Applied Probability, from the University of Rome “La Sapienza” on January 29th, 1992. Since November 1st, 2022, she has been an associate professor in the scientific sector MAT 06 – Probability Calculus and Mathematical Statistics. From 1995 to 2022, she worked as a researcher in the scientific sector MAT 06 – Probability Calculus and Mathematical Statistics. Her research interests include coherent conditional forecasts and their extensions, Hausdorff measures and fractal sets, Choquet integral, representation of orderings, equivalences in complex decisions and complex systems, and knowledge representation in Artificial Intelligence.

Conferences

She attended the MTISD’06 Conference on Methods, Models, and Information Technologies to Support Decision Making, held at the University of Naples – L’Orientale, Procida from September 28th to 30th, 2006. She also participated in the MTISD’04 Conference on Methods, Models, and Information Technologies to Support Decision Making, hosted by the Faculty of Economics and Social Sciences, Benevento from June 24th to 26th, 2004. Additionally, she was present at the SIS Intermediate Conference on Process and Statistical Evaluation Methods in Rome from June 4th to 6th, 2001. She took part in the II Conference of the MURST co-financed Research Project on Models for Treating Partial Knowledge in Decision-Making Processes in Lipari, Sicily from July 22nd to 26th, 2000. Moreover, she attended the I Conference of the MURST co-financed Research Project on Models for Treating Partial Knowledge in Decision-Making Processes in Perugia from April 7th to 9th, 1999. She also participated in the Evolution of Mathematics, its Applications, and its Teaching Conference in Numana from June 4th to 10th, 1999, and the National Mathesis Conference in L’Aquila from October 19th to 21st, 1998. She attended the Days of Combinatorial Geometry in Rome on May 29th and 30th, 1997. Lastly, she was present at the Conference on Methods of Representing Uncertainty in Architecture in Pescara from November 27th to 30th, 1997, and the Conference on Uncertainty Analysis in Economic and Territorial Management in Benevento in May.

 

Internationalizations

She served as an editor, alongside Thomas Augustin and Massimo Marinacci, for the Special Issue of the Ninth International Symposium of Imprecise Probability: Theory and Applications – ISIPTA’15, published in the International Journal of Approximate Reasoning, Volume 84, 39-40, in 2015. Additionally, she was an editor, alongside Thomas Augustin, Enrique Miranda, and Erik Queguebeur, for the Proceedings of the Ninth International Symposium of Imprecise Probability: Theory and Applications – ISIPTA’15, published by Arcne Editrice in 2015. She organized the Ninth International Symposium on Imprecise Probability: Theories and Applications (ISIPTA’15) in Pescara from July 20th to 24th, 2015. Furthermore, she organized the Fifth SIPTA Summer School on Imprecise Probability: Theories and Applications in Pescara from July 16th to 20th, 2012. Since 2001, she has been a member of SIPTA (International Society for Imprecise Probability: Theories and Applications). She served on the Executive Committee of SIPTA from July 14th, 2009, to July 24th, 2011. Since April 2008, she has been a reviewer for Mathematical Reviews (MR). She also served on the Program Committee of the International Symposium on Imprecise Probability: Theories and Applications (ISIPTA ’21) in Granada, Spain, from July 6th to 9th, 2021, and the Program Committee of the International Symposium on Imprecise Probability: Theories and Applications (ISIPTA ’19) in Ghent, Belgium, from July 3rd to 6th, 2019.

 

Scientific Activity

She participated in the PRIN 1997 Research Program – Partial Knowledge and Coherent Probability, led by Professor Romano Scozzafava at La Sapienza University. She also participated in the PRIN 1999 Research Program – Mathematical Models for Uncertainty Treatment and Alternative Project Selection in Architecture and Urban Planning, led by Professor Antonio Maturo at G. d’Annunzio University of Chieti-Pescara, with National Scientific Coordination by Professor Romano Scozzafava at La Sapienza University. She served as a reviewer for national projects as a member of REPRISE (the register of scientific experts established at the MIUR) for the following section: Basic Research. Additionally, she acted as a reviewer for scientific articles within the framework of the VQR 2015-2019. She also reviewed scientific articles for the following international journals indexed in Scopus and/or WoS: International Journal of Approximate Reasoning, Information Sciences, International Journal of Information Technology and Decision Making, Fuzzy Sets and Systems, British Journal of Mathematical and Statistical Psychology, Axioms, and Symmetry.

 

📝🔬Publications📝🔬

Rajni Aggarwal -Synthesis of ionic liquids – Women Researcher Award

Posted on by usudeeparya

Rajni Aggarwal -Synthesis of ionic liquids – Women Researcher Award

Dr. Rajni Aggarwal distinguished academic and researcher in the field Synthesis of ionic liquids. She has accumulated significant teaching experience in the field of chemistry. This includes six months of teaching Organic Chemistry practicals for B.Sc. (HNs) Human Genetics semester I class from July 2011 to November 2012, and another six months teaching the same subject for B.Sc. (HNs) Electronics Technology semester I class from July 2012 to December 2012. Following this, she served for three years as a teacher of Chemistry at BBK DAV College for Women, Amritsar, from 2015 to 2017. Furthermore, she contributed her expertise in the Department of Chemistry from 2022 to 2023, teaching Physical Chemistry to both undergraduate and postgraduate classes over a three-year period

🌐 Professional Profiles

Educations📚📚📚

She holds a B.Sc. in Chemistry (HNs) from Guru Nanak Dev University, Amritsar, obtained in 2007, followed by an M.Sc. in Chemistry (HNs) from the same institution in 2009. During her M.Sc., she conducted a project in inorganic chemistry under the guidance of Dr. T. S. Lobana in the Chemistry Department at GNDU, Amritsar. Subsequently, she pursued her Ph.D. from the Department of Chemistry at Guru Nanak Dev University, Amritsar, under the supervision of Professor Dr. Sukhprit Singh. Her doctoral research focused on the synthesis, characterization, and evaluation of ionic liquids, as well as physical studies related to ionic liquids. Additionally, she has qualified for the Ph.D. Eligibility Test conducted by Guru Nanak Dev University, Amritsar, in August 2010, and the Graduate Aptitude Test conducted by the Indian Institute of Technology (IIT), Bombay, in March 2013.

🏆🏆Awards🏆🏆

 Recipient of UGC SAP Fellowship in science for meritorious student, India (2009 – 2014).

LABORATORY AND INSTRUMENTATION SKILLS

She possesses extensive knowledge and practical skills in various aspects of chemistry, particularly in the realm of organic and inorganic compounds. Her expertise includes conducting multistep organic reactions and monitoring them using techniques such as TLC, UV, fluorescence, NMR, mass spectrometry, and infrared spectroscopy. Additionally, she is proficient in purifying compounds through methods like liquid column chromatography and crystallization.

Furthermore, she is well-versed in the characterization of both organic and inorganic compounds using a wide range of analytical techniques, including NMR, IR, MS, UV-Visible spectroscopy, fluorescence spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), and X-ray diffraction (XRD) experiments.

Moreover, she is adept in instrumentation techniques associated with NMR, IR, UV, fluorescence, as well as utilizing software such as Zetasizer for dynamic light scattering (DLS) analysis and XRD analysis. Her proficiency in these areas enables her to contribute effectively to research and teaching endeavors within the field of chemistry.

CONFERENCES ATTENDED

She has actively participated in numerous national symposiums and seminars, showcasing her dedication to advancing knowledge in the field of chemistry. Notable among these are her poster presentations at the National Symposium on Chemistry in 21st Century held at Guru Nanak Dev University, Amritsar, in December 2011, and the Chemical Constellation Cheminar-2012 at Dr B R Ambedkar National Institute of Technology, Jalandhar, in September 2012.

Additionally, she has presented her research findings at various prestigious events, including the 7th RSC-CRSI Symposium in Chemistry at Banaras Hindu University, Varanasi, in January 2013, and the 15th CRSI National Symposium in Chemistry at the same venue in February 2013. Furthermore, she participated in the National Symposium on Recent Trends in Chemistry held at Guru Nanak Dev University, Amritsar, in March 2013.

Her commitment to scholarly discourse is evident through her attendance and contributions at the IVth, Vth, and VIth National Symposia on Advances in Chemical Sciences, all held at Guru Nanak Dev University, Amritsar, in 2014, 2016, and 2017 respectively. These engagements underscore her active involvement in academic and research activities within the chemistry community.

 

📝🔬Publications📝🔬
  • R. Aggarwal, S. Singh, Synthesis, characterization, and evaluation of surface properties of
    cyclohexyloxyoxoethylbipyridinium gemini amphiphiles, and a Comparison with single-tailed
    amphiphiles
  • R. Aggarwal, S. Singh, G. Hundal, Synthesis, characterization and evaluation of surface properties of
    cyclohexanoxycarbonylmethyl pyridinium and cyclohexanoxycarbonyl methyl imidazolium ionic
    liquids.
  • R. Aggarwal, P. Khullar, M. S. Bakshi, D. Mandial, A. Mahal, G. Ahluwalia. Bipyridinium and
    Imidazolium Ionic Liquids for Nanomaterials Synthesis; pH Effect, Phase Transfer Behavior, and
    Protein Extraction. ACS Sustainable Chemistry & Engineering 2017, 5(9), 7859-7870. (DOI:
    10.1021/acssuschemeng.7b01368)
  • R. Aggarwal. Comparison of physicochemical studies of single tailed and gemini cyclohexanoxy
    carbonyl pyridinium cationic amphiphiles. Journal of proteomics and bioinformatics. Volume 10 (7)
    178-185 (2017).
  • R. Aggarwal, S. Singh. Synthesis, characterization and evaluation of surface and thermal properties of
    3-cyclohexyloxy-2-hydroxypropyl pyridinium and imidazolium surface active ionic liquids. Journal of
    surfactant and Detergents, 2018, vol. 21, issue 1, (doi.org/10.1002/jsde.12002).
  • R. Aggarwal, S. Singh. Synthesis, characterization, and evaluation of surface and thermal properties
    and cytotoxicity of 2-hydroxy-3-phenoxypropyl imidazolium bola-type gemini amphiphiles, Journal of
    surfactant and Detergents, 2018, volume 22 (1), (doi/10.1002/jsde.12203)
  • R. Aggarwal, T. S. Lobana, B. Thakur, R. J. Butcher, M. Zeller, J. P. Jasinki. Synthesis and structure of
    dinuclear palladium complexes with 1, 3-imidazoline-2-thione, Acta Cryst. (2023), E79.
  • R. Aggarwal, S. Singh.Synthesis, self-aggregation, thermal stability and cytotoxicity trends of
    alkyloxypropoxycyclohexane based pyridinium ionic liquids.
    https://doi.org/10.1016/j.molliq.2024.124382.

Muhammad Saqib Khan – Environmental Nanoscience – Best Researcher Award

Posted on by usudeeparya

Muhammad Saqib Khan – Environmental Nanoscience – Best Researcher Award

Dr. Muhammad Saqib Khan distinguished academic and researcher in the field  Environmental Nanoscience. With a Doctorate in Environmental Sciences (PCD number 26226) from the Department of Environmental Sciences at COMSATS University Islamabad, Abbottabad Campus, Pakistan, he has established himself as a prolific researcher and educator. His research endeavors have yielded over 40 publications, including articles in peer-reviewed international journals, short pieces in popular-scientific journals, and contributions to international conferences.

One notable achievement in his research career is the recognition of his article “Photodegradation of Orange II under visible light using Cu–Ni/TiO2: Effect of calcination temperature” as the most cited research publication in the Chemical Engineering Journal for the year 2012. This underscores the impact and relevance of his work in the scientific community, particularly in the realm of chemical engineering.

His cumulative impact factor stands impressively at 120.8, attesting to the significance and influence of his research contributions. As an educator, he imparts knowledge in various subjects at the undergraduate level, including Basic Environment, Chemistry, Environmental Chemistry, Nanomaterials in Environmental Science, Analytical Chemistry, Biomedical Instrumentation and Techniques, Separation Process, Heat Transfer, and Research Methodology.

🌐 Professional Profiles

 

Educations📚📚📚

In his educational journey spanning from 1992 to 2022, he has demonstrated a steadfast commitment to academic excellence and a diverse range of scientific disciplines. Commencing in 1992, he achieved first place with a remarkable 65% in the SSC (Science) examination conducted by the Board of Intermediate and Secondary Education (BISE) Abbottabad, Pakistan. This early success laid the foundation for his subsequent academic pursuits.

Moving forward, he completed his F.Sc. (Pre-Medical) from BISE Abbottabad in 1996, securing the top position with a notable 65.8%. Subsequently, he enrolled in a four-year B.Sc. (Hons) program in Human Nutrition at NWFP Agricultural University Peshawar, Pakistan, from 1996 to 2001. During this period, he authored a review paper on the role of Selenium in human health and delved into a special problem focused on determining the serving size of different food items served on and off campus. His dedication earned him a grade of 3.19/4.00, achieving a commendable 72%.

Furthering his academic journey, he pursued an MS in Environmental Sciences at the Department of Environmental Sciences, COMSATS University Islamabad, Abbottabad Campus, Pakistan, from 2005 to 2008. His thesis, titled “Determination and Quantification of Pesticides Residues in Summer Vegetables using Chromatographic Techniques,” showcased his expertise in environmental science. He obtained a grade of 3.23/4.00, with an impressive 80%.

Culminating his academic achievements, he embarked on a doctoral journey in Environmental Sciences at the same institution, COMSATS University Islamabad, Abbottabad Campus, Pakistan, from 2017 to 2022. His groundbreaking research focused on “Graphene Quantum Dots Decorated Metal and Non-metal Doped Nanomaterials for Photocatalysis of Azo Dyes.” Throughout his PhD coursework, he maintained an outstanding grade of 3.54/4.00, as reflected in the PhD Country Directory Number 26226.

➢ Research interests:

❖ Throughout his academic journey, he has consistently showcased a robust commitment to research excellence, evident through a prolific track record of publications in esteemed peer-reviewed journals. His research interests span a broad spectrum within the field of environmental sciences, with a focused dedication to exploring various aspects of energy, environment, and sustainability. His active contributions extend to the investigation of novel materials, specifically in the realms of energy conversion and storage, greenhouse gas utilization, catalysis development, and the exploration of metal-organic frameworks. His endeavors reflect a passionate pursuit of advancing knowledge and finding innovative solutions to address pressing environmental challenges.

CONFERENCES

1. International Training Workshop on “Promoting Research Excellence in Academics Across
Pakistan”, 2022, organized by Researcher Academy Elsevier
2. International Training Workshop on “Focus on Peer Review”, 2022 organized by Research and
Development Unit, Springer Nature
3. International Training Workshop on “Empowering Knowledge on Ethical Publishing:
Mastering the Art of Identifying Predatory, Fake, and Cloned Journals”, 2022 organized by
Research and Development Unit, Researcher Academy, Elsevier
4. International Training Workshop on “Elsevier Knowledge Hub – Publication Ethics and
Research Integrity in Science”, 2022 organized by Research and Development unit Researcher
academy, Elsevier
5. International Webinar “Microbial Diversity in Changing Climate” Tuesday, March 30, 2021.
6. International Webinar “Air pollution, climate change and their impacts on mountainous water
resources” Tuesday, January 26, 2021.
7. 8th International Conference on Environmentally Sustainable Development (ESDev, 2019). 21-
23 August 2019 at Department of Environmental Sciences, COMSATS University Islamabad,
Abbottabad Campus, Pakistan.
8. International Conference on Environmental Toxicology and Health (ESCON) February 25-27,
2019, organized by Department of Environmental Sciences, COMSATS University, Islamabad,
Vehari Campus

🏆🏆Awards and HONORS🏆🏆

He has achieved notable recognition and success in the field of environmentally sustainable development, marking a distinguished academic and research trajectory. Securing the 3rd position for the Best Paper Award at the 8th International Conference on Environmentally Sustainable Development (ES-Dev 2019) in August 2019 was a significant milestone. His awarded paper, titled “Metal Doped TiO2 Nanomaterials for Water Disinfection,” demonstrated his commitment to advancing innovative solutions in environmental science.

Additionally, his contributions to scientific literature have been acknowledged through the Top Cited Papers for 2011 and 2012, published in the Chemical Engineering Journal. This recognition, bestowed on October 2, 2014, underscored the impact of his research in the field of chemical engineering.

Practical applications of his research were highlighted through the achievement of a Silver Medal in SEDEX 34 in December 2014. His work on Visible Light Assisted Photocatalytic Degradation of DIPA using Fe-Zn/TiO2 Photocatalyst showcased his ability to translate theoretical knowledge into effective solutions for environmental challenges.

Further reinforcing his expertise in photocatalysis, he secured a Gold Medal in SEDEX 29 in April 2012 for his project titled “Photocatalytic Degradation of Azo Dyes under Visible Light using Cu-Ni/TiO2 Photocatalysts.” This accomplishment emphasized the practical implications of his research in addressing environmental concerns.

In addition to these accolades, he received the Best Paper Award at ESCON 2010 for his paper titled “Bimetallic Cu-Ni/TiO2 as Photocatalyst for Hydrogen Production from Water,” presented in May 2010. This recognition highlighted the significance of his research contributions in the pursuit of sustainable and innovative solutions.

Commencing his academic journey, he was honored with a Merit Scholarship for pursuing a Master’s in Environmental Sciences at COMSATS University Islamabad, Abbottabad Campus, Pakistan. This scholarship not only acknowledged his academic excellence but also supported his dedication to advancing knowledge in the critical field of environmental sciences. Overall, these achievements collectively reflect his outstanding contributions to environmentally sustainable development and his continuous pursuit of excellence in research and academia.

TEACHING EXPERIENCE

He brings to his teaching role over 2 years of valuable experience acquired post Ph.D. completion, during which he has adeptly instructed both theory and laboratory classes. At the core of his teaching philosophy is a commitment to student-centered pedagogies, establishing an environment that fosters active engagement and interaction. Integrating advanced technology into his instructional methods, he has effectively communicated complex concepts to his students, enabling a profound understanding of the subject matter. This method not only cultivates critical thinking but also elevates their problem-solving skills, ultimately contributing to a more enriching and effective learning experience.

RESEARCH PROJECTS

He served as the Principal Investigator for two significant research projects. The first project, titled “Genotypic and Phenotypic Response of Vegetables to Pesticides,” was funded by the CUI Research Grant Program (CRGP) with an allocated amount of 0.173 million PKR. Executed over a span of two years from 2008 to 2010, the project aimed to investigate the genetic and phenotypic reactions of vegetables to pesticides, providing valuable insights into the impact of these substances.

The second project, “Enhancement of Adsorption and Photocatalytic activity of TiO2 by doping with metal and non-metal for degradation of azo dyes,” was also conducted under the auspices of the CUI Research Grant Program (CRGP). This project, with a funding amount of 0.27 million PKR, focused on a two-year duration from 2018 to 2020. Its objective was to enhance the adsorption and photocatalytic capabilities of TiO2 through metal and non-metal doping for the degradation of azo dyes. Both projects were completed successfully, contributing valuable insights to their respective fields of study.

📚📚 Books/ Book Chapters📚📚

1. Nadia Riaz, Muhammad Saqib Khan, Maria Sabeen, Bibi Saima Zeb, Shahida Shaheen, Tahir
Hayat. 2022. Chapter 4. Wastewater Irrigation and Plant Growth: An Insight into Molecular
Studies in book, Sustainable Plant Nutrition under Contaminated Environments, Springer
Nature. 57. http://dx.doi.org/10.1007/978-3-030-91499-8_4
2. Qaisar Mahmood, Muhammad Saqib Khan, Nadia Riaz, 2021. Chapter 14: Existing
treatment–globally in full scale plants In book, Pharmaceutical Wastewater Treatment
Technologies, International Water Association (IWA). 353.
https://doi.org/10.2166/9781789061338_0353
3. Riaz, N., Bustam, M. A., Kait, C. F., Man, Z. B., Khan, M. S., Azmi, M. S., Shimekit, B., Ullah,
S., & Elkhalifah, A. E. I. (2014). Adsorption of Azo Dye Orange II by Supported TiO2: A
Review. In Chapter 5: Biomaterials and Technologies, Environmental Engineering, Periodical;
Applied Mechanics and Materials published by Trans Tech Publications, Ltd., 625, 770–774.
https://doi.org/10.4028/www.scientific.net/amm.625.770
4. Nadia Riaz, F.K. Chong, B. K. Dutta, Z.B. Man, M. Saqib Khan, R.M. Ramli. 2014. The
Proceedings of the International Conference on Process Engineering and Advanced Materials
2012 (ICPEAM 2012). Chapter 3: Environmental Engineering. Advanced Materials Research.
Volume 917, pp. 151. ISBN-13: 978-3-03835-052-1. DOI.
https://10.4028/www.scientific.net/AMR.917.151
5. Nadia Riaz, Muhammad Saqib Khan, Arshid Pervez, 2017. Antimicrobial Activities of
Watercress, a local medicinal plant of KPK. Lambert Academic Publications

📝🔬Publications📝🔬